GINEV ROUGHING MACHINE Type SN-2B 1 kW each, with shaft Ø 30 mm. and two different selecting speeds ( 1400-2800 rev./min. ). It is possible to mount front wheels of 120 mm. diameter and of 50, 80 or 100 mm. width and rear wheels 140 mm. Ø 50, 80, 100 mm

S221SN-2B GINEV ROUGHING MACHINE Type SN-2B
The belt rough-scouring machine SN-2B has been designed and
developed for scouring and roughing soles, heels and shoe-bottom in order
to facilitate and to increase the strength of the mastic or the glue during the
mounting of the shoe.
The machine is endowed with two main motors of 1 kW each, with shaft Ø
30 mm. and two different selecting speeds ( 1400-2800 rev./min. ).
It is possible to mount front wheels of 120 mm. diameter and of 50, 80 or
100 mm. width and rear wheels with 140 mm. Ø and 50, 80 or 100 mm
width with the respective belts which have a development of 1440 mm.
This particular model is endowed with a aspirator, with double whirl which
can be activated from the control panel.
On demand, the machine can be supplied with anti-fire device
The machine is manufactured following the CE Standards.
TECHNICAL DATA :
nr. 2 Scouring motors Kw 1,1 – 2/4 poles
nr. 1 Fan motor Kw 0,75 – 2 poles
Belts’ lenght mm. 1440
Belts’ width mm. from 35 to 100
Width cm. 116
Lenght cm. 136
Height cm. 250
Weight Kg. 241
Height of the wheel from ground cm. 107
Noise Db 78
Necessary power for the working kW 3,9
Absorption A 8,8 V. 400/50 Three-phase