GINEV K-55SN has been designed and made for orthopedic workshop.equipped with two abrasive belts for scouring 1440 x 100 mm; and an independent and tiltable naumkeag.
S221 FINISHING MACHINE mod. K-55SN
The finishing machine model K-55SN has been designed and made for
orthopedic workshop.
The machine is able to perform various types of processing as much as it
is equipped with two abrasive belts for scouring 1440 x 100 mm; and an
independent and tiltable naumkeag.
Thanks to M16 threaded attack obtained on the shaft, it is possible to
mount several tools depending on the operation to be carried out.
The dusty residues generated by production are sucked from the nozzles
then filtered through a specific cloth-bag placed inside.
The machine is manufactured in conformity with the CE Standards.
TECHNICAL DATA :
Suction motor kW 1,1 - 2800 rpm
Rough-scouring motor kW 1,1 - 2800 rpm
Naumkeag motor kW 0,25 - 2800 rpm
Depth cm. 75
Length cm. 80
Height cm. 172
Weight Kg. 235
Noise dB 76,3
Necessary power kW 2,55
Absorption 15,5 A 230 V / 50 Hz 1-phase
The finishing machine model K-55SN has been designed and made for
orthopedic workshop.
The machine is able to perform various types of processing as much as it
is equipped with two abrasive belts for scouring 1440 x 100 mm; and an
independent and tiltable naumkeag.
Thanks to M16 threaded attack obtained on the shaft, it is possible to
mount several tools depending on the operation to be carried out.
The dusty residues generated by production are sucked from the nozzles
then filtered through a specific cloth-bag placed inside.
The machine is manufactured in conformity with the CE Standards.
TECHNICAL DATA :
Suction motor kW 1,1 - 2800 rpm
Rough-scouring motor kW 1,1 - 2800 rpm
Naumkeag motor kW 0,25 - 2800 rpm
Depth cm. 75
Length cm. 80
Height cm. 172
Weight Kg. 235
Noise dB 76,3
Necessary power kW 2,55
Absorption 15,5 A 230 V / 50 Hz 1-phase
